|
| # |
Author |
Title |
Presented
on/at |
Date |
| 1 |
Kruse,
D. J. |
State-of-the-Art
Data Acquisition Equipment and Field Measurement
Techniques for Conveyor Belts |
SME
Annual Convention
| February
2004 |
| 2 |
Nordell, L. K. |
Overland
Conveyors Designed for Efficient Cost and
Performance |
Bulk
India |
December
2003 |
| 3 |
Nordell, L. K. |
Modern
Ore Transfer Chute Belt Feeder Designs Developed
from Discrete Element Modeling (DEM) |
BELTCON 12 Conference,
Republic of South Africa |
July
2003 |
| 4 |
Nordell, L. K. |
Overland
Conveyors Designed for Efficient Cost and
Performance |
BELTCON
12 Conference,
Republic of South Africa |
July
2003 |
| 5 |
Nordell, L. K. |
Designing
Power Efficient Belt Conveyors |
Power and
Electric Annual Exposition |
March
2003 |
| 6 |
Cornet, J. L. |
Head and
Tail Controls in Long Overland Conveyors |
SME Annual Conference
in Phoenix, Arizona |
February 2002 |
| 7 |
Kruse,
D. J. |
Optimizing
Conveyor Takeup Systems Using Dynamic Analysis and the Implementation
of Capstans |
SME
Annual Conference in Phoenix, Arizona |
February
2002 |
| 8 |
Lemmon, R. |
Local Stresses
in Belt Turnovers in Conveyor Belts |
SME Annual Conference
in Phoenix, Arizona |
February 2002 |
| 9 |
Kruse,
D. J. |
Conveyor
Belt Transfer Chute Modeling and Other Applications Using
The Discrete Element Method in the Material Handling Industry |
Bulk
Material Handling, by Conveyer Belt III SME Publication |
2000 |
| 10 |
Nordell, L. K.
|
A New Era in
Overland Conveyor Belt Design |
Engineering Mining
Journal |
1999 |
| 11 |
Nordell,
L. K. |
Recent
Applications in Conveyor Systems to Improve Conveyor Performance |
IIR
Conference, Perth & Sydney, Australia |
July
1999 |
| 12 |
Kruse, D. J. and Lodewijks, G.
|
The Power of
Field Measurements – Part 1 |
Bulk Solids Handling
Trans Tech Publications, Vol. 18, No. 3 |
September 1998 |
| 13 |
Nordell,
L. K. |
Improving
Belt Conveyor Efficiencies: Power, Strength & Life, W/Overland System
Case Studies |
4th
Annual Optimizing Conveyor Performance in Mining Conference,
Australasian Mining & Energy Taskforce, Perth &
Sydney Australia |
April
1998 |
| 14 |
Nordell, L. K. |
Zisco Installs
World’s Longest Troughed Belt 15.6 KM Horizontally
Curved Conveyor |
BELTCON 9 Conference,
Republic of South Africa |
October
1997 |
| 15 |
Nordell,
L. K. |
Particle
Flow Modeling: Transfer Chutes and Other Applications |
BELTCON
9 Conference, Republic of South Africa | October
1997 |
| 16 |
Nordell,
L. K. |
The Power
of Rubber – Part 1 |
Bulk Solids
Handling, Trans Tech Publications, Vol. 16, No. 3 |
1996 |
| 17 |
Nordell,
L. K. |
Rubbers
Impact on Belt Power, Strength and Life | BELTCON
8 Conference, Republic of South Africa | October
1995 |
| 18 |
Nordell, L. K. |
Rubber’s
Influence on Belt Conveyor Design, Understanding Rubber
Properties in Conveyor Design | BELTCON 8 Conference,
Republic of South Africa |
October 1995 |
| 19 |
Nordell,
L. K. and J. J. Van Heerden |
Technological
Innovation Extend Life of Palabora’s Main Slope Belt |
BELTCON
8 Conference, Republic of South Africa |
October
1995 |
| 20 |
Nordell,
L. K. and J. J. Van Heerden |
Curved
Chutes and Other Improvements at the Palabora Mine |
BELTCON
8 Conference, Republic of South Africa | October
1995 |
| 21 |
Melley,
R. E. and L. K. Nordell |
Cold
Weather Belt Power Equation Based on Belt Rubber Properties |
AIME-SME
Annual Convention, Denver, Colorado |
March
1995 |
| 22 |
Nordell,
L. K. and R. E. Destefano |
Spring
Creek Coal Horizontally Curved Overland: Easy Upgrading
of Its Starting Controls Using Head & Tail Drives
with Gravity Takeup |
AIME-SME
Annual Convention, Denver, Colorado |
March 1995 |
| 23 |
Nordell,
L. K. | Palabora
Installs Curved Transfer Chute in Hard Rock to Minimize
Belt Cover Wear | Bulk
Solids Handling Trans Tech Publications, Vol. 14,
No. 4 | 1994 |
| 24 |
Cornet, J. L. |
Programmable
Logic Control for Modern Material Handling Systems |
AIME-SME Annual
Convention, Reno, Nevada |
February 1993 |
| 25 |
Cornet,
J. L. |
Requirement
for Stringent Specifications for Braking Systems on
Regenerative Conveyors |
AIME-SME
Annual Convention, Reno Nevada |
February
1993 |
| 26 |
Nordell,
L. K. | Steel Cord
Splice Design and Fabrication Techniques | AIME-SME
Annual Convention, Reno Nevada | February
1993 |
| 27 |
O’Donovan,
E.J. |
Dynamic
Analysis – Benefits for All Conveyors |
AIME-SME
Annual Convention, Reno, Nevada |
February
1993 |
| 28 |
Sethi,
V. and L. K. Nordell |
Modern
Pulley Design Techniques and Failure Analysis Methods |
AIME-SME
Annual Convention, Reno, Nevada |
February
1993 |
| 29 |
Qiu,
X. and V. Sethi |
A
New Pulley Stress Analysis Method Based on Modified Transfer
Matrix |
Bulk
Solids Handling Trans Tech Publications, Vol. 13, No. 4 |
1993 |
| 30 |
Nordell,
L. K. |
Steel Cord
Belt & Splice Construction: Modernizing Their
Specifications; Improving Their Economics |
Bulk Solids
Handling, Trans Tech Publications, Vol. 13, No. 4,
pp 781-792 |
1993 |
| 31 |
Cornet,
J. L. |
A
Modern Approach to PLC Programming in Mining Operations |
Bulk
Solids Handling Trans Tech Publication, Vol. 11, No. 4,
pp. 871-877 |
November
1991 |
| 32 |
Nordell, L. K. |
The Channar 20km
Overland, A Flagship for Modern Belt Conveyor Technology |
Bulk Solids Handling,
Trans Tech Publication, Vol. 11, No. 4, pp 781-792 |
November 1991 |
| 33 |
Nordell,
L. K., X. Qiu, and V. Sethi |
Belt
Conveyor Steel Cord Splice Analysis Using Finite Element
Methods |
Bulk
Solids Handling, Trans Tech Publications, Vol. 11, No. 4,
pp. 863-868 |
November
1991 |
| 34 |
Nordell, L. K. |
Improved High
Capacity Conveyor Designs |
American Mining
Congress Annual Meeting |
1989 |
| 35 |
Nordell,
L. K. |
High
Capacity Conveyors: Concepts
& Trends Influencing Their Design |
AMC
MINEXPO Conference, Chicago, Illinois |
April
1988 |
| 36 |
Nordell, L. K. |
The Theory and
Practice of Belt Conveyor Dynamic Analysis |
BELTCON 4 Conference,
Republic of South Africa |
September 1987 |
| 37 |
Nordell,
L. K. and Z. P. Ciozda |
The
Analysis of Starting and Stopping High Strengths, High Capacity
Belts Using Modern Engineering Tools |
AIME-SME
Annual Meeting |
1984 |
| 38 |
Nordell, L. K. |
Selection and
Sizing of Conveyors & Stackers |
AIME-SME Annual
Meeting |
September 1982 |
| 39 |
Nordell,
L. K. |
Belt
Conveyor Drives:
Factors That Influence Their Selection |
AIME-SME
Annual Meeting |
March
1977 |
| 40 |
Nordell,
L. K. |
Palabora
15.5 Slope Belt Drive System Design, 7050 kW Wound
Motor & Resister Step Control; Fixed Time Resistors
Get The Job Done |
Bulk Solids Handling
Trans Tech Publications | |
